Digital kilovoltmeter SKV-100 is designed for the measurement of the direct current voltage, effective and crest values of the direct current voltage.

Digital kilovoltmeter SKV-40 is designed for the measurement of the direct current voltage, effective and crest values of the alternating current voltage. The instrument can be used for the adjustment of the measuring voltage transformers, control and measurement of the signals when producing and metering the electricity

The meter "Tangent 2000" is the noise-proof, highly-accurate and safe in service instrument designed for the control of the high-voltage equipment insulation parameters. The instrument identifying feature in regard to the other instruments of this application, commercially available in RF, is the crucially higher noise resistance provided by the existence of the testing voltage internal generator with the frequency that is different from the commercial. It allows obtaining the high accuracy of the measurements under the conditions of high level of noise disturbance on the open switchgears and finding out the minimal parametric variation of the insulation during the periodic inspection of the high-voltage equipment.

The instrument "Coefficient-1.3" allows measuring the following parameters for the transformers of all the circuits and groups of connections according to GOST 30830 consequently at every phase: - Transformation rate; - No-load operation loss at the low voltage; - Short circuit impedance. - Effective (root-mean-square) voltage

The instrument "Coefficient-1.1" allows measuring the following parameters for the transformers of all the circuits and groups of connections according to GOST 30830 consequently at every phase: - Transformation rate; - Effective (root-mean-square) voltage

The instrument allows measuring the following parameters for the transformers of all the circuits and groups of connections according to GOST 30830 simultaneously at every phase: - Transformation rate; - Effective (root-mean-square) voltage

Infrared PHA gas analyzers are designed to measure the volume fraction of methane (CH4), propane (C3H8), carbon dioxide (CO2), oxygen (O2), hydrogen (H2) and the mass concentration of carbon monoxide (CO), hydrogen sulfide (H2S), sulfur dioxide ( SO2), nitrogen dioxide (NO2), ammonia (NH3) and the sum of saturated hydrocarbons Σ (C2-C10). The PHA gas analyzer has a portable design with sensors integrated in the housing. The gas analyzer is designed to ensure industrial safety and control the content of various substances in the air of the working area. There are 96 modifications of infrared PHA gas analyzers,