Advantages:

- low power consumption,

- has a wide control range of processing parameters,

- high performance and precision of coating.

Application:

- manual covering of edge surfaces of turnine blades, of external surfaces of spacer rings of compressor rotor disks, spacers,operating parts in the hinge and fittings under dry friction conditions (cases, filter-gearboxes, bushings, adapters, internal cases, liners).

- technology of renovation, recovery and strengthening of machine parts, machinery, equipment, tools and tooling.



Technical characteristics:

Power consumption, kW, no more 2
Specific alloying time during coating with the alloy Т15К6 with thickness not less than 0,04 mm, no more, min/cm2 2
Pulse repetition frequency when working with IMESA-2006vr, Hz 50-1000
Discreteness of frequency setting, Hz 50-1000
Accuracy of frequency setting, % ± 2
The capacity of the storage capacitors μF 100 - 900
Discretness of capacity setting, μF 100
Voltage in "idling" mode, V 20 - 80
Discreteness voltage setting, V 5
Accuracy of voltage setting, % ± 10
Average operating current when alloying, A 0,5 - 20
Vbration frequency of an electrode in IMESA-2006vb, Hz 100
СSynchronization of pulse of alloying current when working with REI-2006vb with vibration frequency of an electrode
Rotation speed of an electrode in IMESA-2006vr, rpm 800 - 4000
Discretness of rotation speed settng, rpm 400
Voltage of single-phase power line, V 220 (+10… -15 %)
Power line frequency, Hz 50± 1
Operating mode Long


Overall dimensions, mm/weight, kg

IMESA-2006Vr 284х185х55/ 2,1
IMESA-2006Vb 195х110х60/ 1,5
GI-2006, without considering cable size 710х335х1170/ 145
KU, without considering cables size 795х740х105/ 14
Cart 705х1110х1485/ 50