 |
High-Performance Ballast Cleaning Machine «ЩОМ-1200»
High-Performance Ballast Cleaning Machine «ЩОМ-1200» with output capacity of up to 1200 cubic m/h, performing cleaned ballast layering into the track with its separating into fractions and cutting surface consolidation before laying of textile fabric or polystyrene foam plates and consolidation of the first (lower) layer of cleaned ballast. The machine consists of three sections: Tractive and Electricity-Generating Section «ТЭС», extracting section and cleaning section. Tractive and Electricity-Generating Section «ТЭС» is equipped with diesel-generator of the Cummins Company with capacity of 650 kW.
Part number:
Supplier:
RPM GroupDescription
Technical Specifications
Output capacity, m3/h 1200
— For cleaning at grasping width of 5 m
— Cutting depth of 0.4 m
Width of cleaning, maximum, mm: 5200
Depth of cleaning below level of the cross-sleepers, maximum, mm: 600
Lateral tilt of cutting, %: ±5
Content of contaminants, remaining in macadam after cleaning, %: 5
Grain coarseness of macadam returned into the track: 20-70
Width of distribution of lower layer of macadam to be cleaned, m: 3-3,5
Lifting of track PGC, mm: 200
Shifting of track PGC, mm: ±350
Travelling speed, km/h:
— Reduced speed mode (operating): от 0,06 до 0,6
— Transport, in self-propelled travelling mode and within the train: 80
Output capacity, m3/h 1200
— For cleaning at grasping width of 5 m
— Cutting depth of 0.4 m
Width of cleaning, maximum, mm: 5200
Depth of cleaning below level of the cross-sleepers, maximum, mm: 600
Lateral tilt of cutting, %: ±5
Content of contaminants, remaining in macadam after cleaning, %: 5
Grain coarseness of macadam returned into the track: 20-70
Width of distribution of lower layer of macadam to be cleaned, m: 3-3,5
Lifting of track PGC, mm: 200
Shifting of track PGC, mm: ±350
Travelling speed, km/h:
— Reduced speed mode (operating): от 0,06 до 0,6
— Transport, in self-propelled travelling mode and within the train: 80