Terahertz scanning Fabry-Perot interferometer (TSFPI) is designed for measuring wavelength and intensity of narrowband THz radiation. TSFPI may be used with pulsed as well as continuous sources of narrowband THz radiation.

Nowadays energy-saving indexes become basic among competing equipment manufacturers, so RUE works «Mogilevliftmash» began to manufacture energy-saving elevators LP-0463BE and LP-0401BE in 2008. Basic distinction of these lifts is the application of the main drive speed controller and drive of cabin doors. Speed controller gives significant saving of the electric power (about 34,7%) and ensures smoothness of lift traffic. The average value of power consumption for double-speed drive is 3,54 kW/h, for main drive speed with speed controller is 2,31 kW/h. Energy-saving elevators are widely applied for replacement of morally and physically worn elevators equipment. The installation of energy-saving elevators needs no cabin guides and counterweight or fixation parts. It allows saving up to 30% from the funds of equipment production and transportation. The period of elevator’s installation and commission compound up to 2-3 weeks. Thus all expenses reduction for a new elevator production, transportation and reinstallation will compound up to 50% .

Freight elevator GV-3015 with load-capacity 3200 kg, motion speed 0,5 m/sec is designed for cars transportation. They are used within multi-level garages and automobile service centers.

Combine PALESSE GS16 by its performance ranks the top level in model range of PALESSE combines. Combine of modern technical level with 530 hp engine designed for farms with large volume of harvesting of high-yielding cereals, grains, legumes and other threshed crops. Double drum threshing system with pre-accelerating of grain mass flow provides careful threshing and high productivity. Instead of key straw shaker combine equipped with rotary separator with two rotors, "wrapped" with fixed lattice decks and rotating in opposite directions. Such combined scheme mixes advantages of drum threshing and rotary separation is best suited for farms, which at the same time in high volumes harvested cereal crops and corn for grain. High level of automation of running processes eliminates operators mistakes and ensure stable operation of combine in changing conditions of harvesting. Spacious cabin of new unified series provides all conditions for operator without stress and tiredness within long working shift.

Harvester FS6033C cuts maize (in any ripeness stage), sorghum, sunflower and other rough-stemmed crops, mows grass and pickups swaths of slightly dried seeded and natural grass with simultaneous chopping and loading directly into vehicle or storing of chopped silage in the bunker followed by unloading into vehicle. Forage harvester PALESSE FS6033C is equipped with caterpillar tracks with reinforced rubber tracks and storage hopper with the unloading conveyor, designed special for forage conservation in areas with high soil moistening. In such circumstances, when the forage fields are impassable for vehicles, harvester provides conservation of milled forage with its storing in the bunker, and the mass unloading from the bunker into the body of vehicles takes place at the edge of the field. By normal bearing capacity of the soil the unloading can be done directly through silage duct into the body of the moving beside vehicle or tractor trailer. Separate hydraulic drive of each track provides the harvester high maneuverability.