Purpose
KMP-2 is intended:
- for switching of devices of measurement of pressure (pressure sensors, manometers and e.t.c.) with the highway;
- for check of the device of pressure on "0".
- for checking of the device of pressure to 6 MPas, without taking off it of the highway pressure, through a pilot hole of the drainage valve, at the closed main valve.
- for safe and convenient mounting and dismantle of devices of measurement of pressure by means of a cap nut (i.e. excludes an opportunity to transfer the pressure sensor when mounting);
- for damping of pressure;
- at dismantle, by means of the drainage valve for depressurization in the working chamber of the measuring device to atmospheric (at compartments from the highway);

Design features:
The module does not perform function of the crane - the flow controller of the measured environment, it performs function of the valve between the measured environment and the working chamber of the measuring device.

KPM 2 allows to drain the pulse line and to connect the inspection and metrological equipment by means of a cap nut.

All KPM 2 nodes adjoining to working liquid are made of high-quality stainless steel that provides long and its reliable use. The valve necessary at mounting of manometers, pressure sensors, etc. is provided in a design of KPM 2 drainage (drain valve).

The KPM 2 case is executed from a monolithic corrosion-proof hexagon with a section of 27 mm.

KPM 2 is molded by pressure 6.0 MPa.
Working pressure 4,0 MPas.
Working environment cold water, hot water, steam.
KPM 2 has the union with an internal thread G 1/2 and a cap nut with a thread of M 20x1,5(G1/2).
Weight 320 grams.
Material stainless steel 12kh18n10.
Tightness class A in accordance with GOST 9544-93
Guarantee 2 years.
Service life 15 years.