 |
Press PM-100M
The press universal small-size (pressure setter) PM-100M (manometrical), productions of Ltd company "Gidrogazkomplekt, is applied to a task of the required hydraulic pressure for carrying out checkings of devices of measurement of pressure (pressure sensors, manometers, vacuum meters, compound pressure gages, differential pressure gages, etc.) by method of checking of indications, a model gage with calibrated, to molding of tightness of different technical products and systems (cranes, latches, valves, etc.) and also as the mobile source of a task of pressure for laboratory and production needs which is not demanding connection of outside communications.
Part number:
Supplier:
GidrogazkomplektDescription
Prime area of application of a press, for pressure task PM-100M - as the auxiliary device to devices in bodies of the public metrological service and at the industrial enterprises which are releasing and operating pressure gages. The press has no measuring part, and is not subject to obligatory certification. The limit of an admissible main error is defined by accuracy rating of a model gage.
For checking by a checking method, to a press, we recommend to buy our model gages the MO-05 manometer.
The press PM-100M, is made of quality stainless steel (08X18H) equipped with two Auto clamping jig cartridges and a pump (pumping) of TU 4212-008-00226222-2014. The pump, is intended for creation of preliminary hydraulic excessive pressure and filling of working cavities.
The calibrated device joins the Auto clamping jig boss by effort of a hand and provides reliable connection to 120 MPas. Two stubs from samodzhimny cartridges are reliably attached to a press by chains that the press excludes their loss in use. Each stub is supplied with a magnet by means of which the stub fastens to the basis PM-100M. The press is intended for long use, service life not less than 15 years. Reliability of a press is provided as a result of use of such materials as quality stainless steel, titanium and ceramics silicon nitrite.
The press is issued in modification on TU 4212-008-00226218-2007 support. PM is convenient for application as a stationary press, with a possibility of rigid fixing of a press to a horizontal surface, through pilot holes in a support. Is included in the standard package of a press, a set of spare rubber rings (sealants) and the operating manual (passport).
As the environment for transmitting pressure PM-100M can be used water, oil, alcohol.
Product Specifications
Excessive pressure, MPa, (hydraulics) 0 … 100 (the admission to 120)
Volume of replacement of the piston camera of a press, cm3 6
The volume of the liquid which is filled in in a tank, cm3 160
Leading dimensions, mm (with the twisted running screw) L.W.H. 430/320/280
Weight (without fastening nodes), kg no more than 8
Ambient air temperature, hail. With ° -20…+50
For checking by a checking method, to a press, we recommend to buy our model gages the MO-05 manometer.
The press PM-100M, is made of quality stainless steel (08X18H) equipped with two Auto clamping jig cartridges and a pump (pumping) of TU 4212-008-00226222-2014. The pump, is intended for creation of preliminary hydraulic excessive pressure and filling of working cavities.
The calibrated device joins the Auto clamping jig boss by effort of a hand and provides reliable connection to 120 MPas. Two stubs from samodzhimny cartridges are reliably attached to a press by chains that the press excludes their loss in use. Each stub is supplied with a magnet by means of which the stub fastens to the basis PM-100M. The press is intended for long use, service life not less than 15 years. Reliability of a press is provided as a result of use of such materials as quality stainless steel, titanium and ceramics silicon nitrite.
The press is issued in modification on TU 4212-008-00226218-2007 support. PM is convenient for application as a stationary press, with a possibility of rigid fixing of a press to a horizontal surface, through pilot holes in a support. Is included in the standard package of a press, a set of spare rubber rings (sealants) and the operating manual (passport).
As the environment for transmitting pressure PM-100M can be used water, oil, alcohol.
Product Specifications
Excessive pressure, MPa, (hydraulics) 0 … 100 (the admission to 120)
Volume of replacement of the piston camera of a press, cm3 6
The volume of the liquid which is filled in in a tank, cm3 160
Leading dimensions, mm (with the twisted running screw) L.W.H. 430/320/280
Weight (without fastening nodes), kg no more than 8
Ambient air temperature, hail. With ° -20…+50