Self-diagnostics at the start;
Convenient zero setting;
LED indication of operation modes and error occurrence;
Storage of non-standard setting for measurement limits in the memory;
Range resetting depth up to 01:25;
Explosion-proof version, explosion-proof enclosure, combined explosion protection (IS and explosion-proof).
Configuration with the help of mechanical switches, HART-protocol configuration;
Remote communication in point and mains modes;
Adjustment, servicing and switching of gauge measurement ranges in a real-time mode.
Manufactured in accordance to TC 4212-013-59541470-2016.

Intended for the operation in the systems of automatic control, regulation and supervision of technological processes in oil and gas industry, power engineering, transport safety systems, chemical industry and other.

Versions in terms of environment immunity:

general purpose industrial grade;
IS circuit 0Ех ia IIС Т5 Ga Хand protection against dust ignition by the shell Ех ta IIIС Т90°C Da Х;
explosion-proof enclosure 1Ех d IIC T5 Gb X;
combined protection intrinsically safe circuit and explosion-proof shell Ga Ех d+ia IIC T5 X, protection against dust ignition by shell Ех ta IIIС Т90°C Da Х.
Output signal initial value correction with the help of a magnetic key.

Re-setting for several standard ranges of the measurement limit both with the help of mechanical switches and a HART-protocol.

Setting for non-standard lower and upper measuring limits.

Setting all measurement units at the manufacturing plant by the customer’s request or change through a HART-protocol.

Measured pressure:

Excess (Table 1) 0…100 МПа;
Absolute (Table 2) 0…16 МПа;
Excess- expansion (Table 3) -0,1…16 МПа;
Expansion (Table 4) 0…100 кПа;
Pressure difference (Table 5) 0…2,5 МПа;
Hydrostatic pressure (Table 6) 0… 250 кПа.