 |
HORIZONTAL PUMPING SYSTEMS
Novomet horizontal pumping systems (HPS) use electrical submersible pumping (ESP) technology in surface applications to help customers control costs, stop failures, and avoid gas cycling. Because of their advantages over older pump technologies, surface pumps are quickly becoming the standard for common applications like fluid transfer and water injection. Unfortunately, some surface pump manufacturers are putting out unreliable systems that fail prematurely or that burn out due to gas presence in the fluid. Too many horizontal pumping systems wind up beaten and broken. But it doesn’t have to be that way.
Part number:
Supplier:
Novomet-PermDescription
applications
Fluid transfer
Pipeline boosting
Injection wells
Jet pumping (water-gas injection)
Salt cavern leaching
Mine dewatering
Geothermal stations
capabilities
Flowrates from 95 – 100,000 BPD
(15 – 16,000 m3/d)
High-temperature operation up to 480°F (250°C)
features
Rugged construction eliminates the need for maintenance in the first 3 years (assumes monthly servicing)
Skid-mounted, modular design enables you to replace only the components you need
Flexible design enables you to replace failed parts in a competitor’s surface pump with Novomet components
Exceptional gas handling capabilities reduce downtime and increase runlife
Capacity of one system
up to 16000 m3/day (@50Hz)
up to 100,000 bbl/d (@60Hz)
Intake pressure
up to 35 MPa
up to 5,000 psi
Discharge pressure
up to 70 MPa
up to 10,000 psi
Motor power
up to 2200 KW (@50Hz)
3000 hp (@60Hz)
Perform no major maintenance for 3 years (assumes routine monthly servicing)
Replace and upgrade only the parts you need with skid-mounted, modular assembly (on our HPS or a competitor’s)
Efficiently handle gas-to-fluid ratios as high as 97%
Start pumping in as few as 2 weeks with short order fulfillment times (varies by system and location)
Deploy almost anywhere with weather-resistant outdoor materials and construction
Add an enclosure for protection in extreme temperatures and environments
Choose trailer-mounted systems for easy deployment and mobility
Use the interactive interface to manually control equipment and operating parameters
Set it and forget it with automated operation, or control the system from anywhere with remote access and control (pump frequency, control valve, etc.)
Keep pumping in fluids with a wide viscosity range (1 – 450 cp), suction pressure as low as 1.5 psi (0.1 bar), flowrates from 95 – 100,000 BPD (15 – 16,000 m3/d), and temperatures up to 480°F (250°C)
Fluid transfer
Pipeline boosting
Injection wells
Jet pumping (water-gas injection)
Salt cavern leaching
Mine dewatering
Geothermal stations
capabilities
Flowrates from 95 – 100,000 BPD
(15 – 16,000 m3/d)
High-temperature operation up to 480°F (250°C)
features
Rugged construction eliminates the need for maintenance in the first 3 years (assumes monthly servicing)
Skid-mounted, modular design enables you to replace only the components you need
Flexible design enables you to replace failed parts in a competitor’s surface pump with Novomet components
Exceptional gas handling capabilities reduce downtime and increase runlife
Capacity of one system
up to 16000 m3/day (@50Hz)
up to 100,000 bbl/d (@60Hz)
Intake pressure
up to 35 MPa
up to 5,000 psi
Discharge pressure
up to 70 MPa
up to 10,000 psi
Motor power
up to 2200 KW (@50Hz)
3000 hp (@60Hz)
Perform no major maintenance for 3 years (assumes routine monthly servicing)
Replace and upgrade only the parts you need with skid-mounted, modular assembly (on our HPS or a competitor’s)
Efficiently handle gas-to-fluid ratios as high as 97%
Start pumping in as few as 2 weeks with short order fulfillment times (varies by system and location)
Deploy almost anywhere with weather-resistant outdoor materials and construction
Add an enclosure for protection in extreme temperatures and environments
Choose trailer-mounted systems for easy deployment and mobility
Use the interactive interface to manually control equipment and operating parameters
Set it and forget it with automated operation, or control the system from anywhere with remote access and control (pump frequency, control valve, etc.)
Keep pumping in fluids with a wide viscosity range (1 – 450 cp), suction pressure as low as 1.5 psi (0.1 bar), flowrates from 95 – 100,000 BPD (15 – 16,000 m3/d), and temperatures up to 480°F (250°C)