For production of springs “Ural Spring Plant” Ltd. uses the following steel grades: ст.65-ст.85, 60Г-70Г, 55С2-60С2, 55С2А-60С2А, 50ХГА, 60С2ХА, 60С2ХФА, 51ХФА (St.65-St.85, 60G-70G, 55S2-60S2, 55S2A-60S2A, 50HGA, 60S2HA, 60S2HFA, 51HFA).

Tension springs are springs that work in tension and resist axial load straining the whole spring. At load removal, the spring recovers its initial position – it tightens. The main type of coil deformation is twisting.

Enterprise quality management system is certified against the requirements of the International standard ISO 9001:2008 by certification authority Bureau Veritas Certification.

At production of springs at Ural Spring Plant traditional technologies are used along with modern imported and home equipment that together with quality home and imported rolled metal products ensure high quality of output products.

The plant test laboratory is also equipped with up-to-date imported and home equipment. The Laboratory has a certificate of measuring equipment state estimation of a laboratory of Federal Budgetary Organization “Standardization, Metrology and Certification Centre of Bashkortostan Republic”.

We are able to cover the springs with the following coatings:

polymeric powder coating
paint coating (ПФ-115 (PF-115), НЦ 132 (NC 132), АФ "Щит" (AF “Shchit”))
chemical oxidation with oiling
electrolytic zincing
Cost of springs depends on the following parameters:

product configuration (parameters)
quantity of ordered products
product material
terms of order
Technical characteristics
Wire diameter: 0.5 – 25.00 mm

Spring outer diameter: 6 - 200 mm

Spring length: 5.0 - 1500 mm

Coiling direction: right and left