Description
The “HydrophobNeo – W” composition is aimed to improve water-repellent properties of the articles made from wood, plywood, wood-chip boards, etc. Also it protects the articles from mould, fungi and rotting without using dangerous for human health and environment antiseptics. After drying the “HydrophobNeo – W” composition does not change the wood natural color, structure and odor, does not prevent moisture- and gas- exchange at the article surface.
Water-repellent agent “HydrophobNeo – W” is supplied in the form of two solutions. Before using the solution №2 is poured into the solution №1 followed by good mixing (shaking), after this the composition is ready to use. The mixed composition may be stored for several weeks in the closed (but not hermetically) container. The application and drying works should be held in the well aired rooms or at the open air. The compositions are applied in one layer by brush, applicator roll, sponge or sprayer in amount enough to wet the surface but without runs. The treated articles should be conditioned for several hours (at room temperature), after this they are ready for use. At lower temperatures the conditioning time increases. Before composition application the surface may be colored with mordant and other nonfilm forming coatings. The “HydrophobNeo – W” composition gives the best water-repellent properties when used for well dried wood, however it may be used for slightly humid (but not wet) articles. For painting of wood articles treated by the “HydrophobNeo – W” water-repellent agent alkyd based paint should be used. During composition storage the influence of increased temperatures /over +35°C (+95°F)/ and direct sunlight should be excluded. Low temperatures and frost are not dangerous for the composition. The warranty storage time is 1 year.
Specifications
1) Low viscous transparent colorless liquid with alcohol odor. 2) Penetration depth in the article is about 1/8 In. (several millimeters), depends on the wood wetness. 3) Package size: 1,321 Gal (5 liters). 4) Coverage area: 250 to 450 Sq. Ft. (23 to 42 sq. meters), depends on surface.
Water-repellent agent “HydrophobNeo – W” is supplied in the form of two solutions. Before using the solution №2 is poured into the solution №1 followed by good mixing (shaking), after this the composition is ready to use. The mixed composition may be stored for several weeks in the closed (but not hermetically) container. The application and drying works should be held in the well aired rooms or at the open air. The compositions are applied in one layer by brush, applicator roll, sponge or sprayer in amount enough to wet the surface but without runs. The treated articles should be conditioned for several hours (at room temperature), after this they are ready for use. At lower temperatures the conditioning time increases. Before composition application the surface may be colored with mordant and other nonfilm forming coatings. The “HydrophobNeo – W” composition gives the best water-repellent properties when used for well dried wood, however it may be used for slightly humid (but not wet) articles. For painting of wood articles treated by the “HydrophobNeo – W” water-repellent agent alkyd based paint should be used. During composition storage the influence of increased temperatures /over +35°C (+95°F)/ and direct sunlight should be excluded. Low temperatures and frost are not dangerous for the composition. The warranty storage time is 1 year.
Specifications
1) Low viscous transparent colorless liquid with alcohol odor. 2) Penetration depth in the article is about 1/8 In. (several millimeters), depends on the wood wetness. 3) Package size: 1,321 Gal (5 liters). 4) Coverage area: 250 to 450 Sq. Ft. (23 to 42 sq. meters), depends on surface.