 |
Security system with GSM-module and battery-powered in the body of the motion sensor Contact GSM-2
Contact GSM-2 — is a compact security device, placed in one case with PIR motion sensor. You’ll be able to install the security alarm within minutes at any property:
garage,
kiosk,
van,
any room in GSM coverage area.
Part number:
Supplier:
RitmDescription
Besides that, with Contact GSM-2 you can set temporary protection of the property while redecoration work is in process.
Replaceable battery makes Contact GSM-2 fully automatic, which eases it’s assembling: you don’t need to take care of wire feeding. Contact GSM-2 will perfectly fit in the design of the room because of its size, nice design and lack of wires. In case it’s necessary (for example, to setup an exterior siren)
the security device works even from exterior power supply
of 12 V.
Arming
Ways to put Contact GSM-2 into armed position:
via Touch Memory keys,
via key fobs,
via external control contacts.
When you are entering a secured facility, it’s enough to press your
Touch Memory key to the readout device, to press the button on the
key fob or to intrude the external control contacts in order to disarm
the property.
Arming it is easy as well. Exit delay will allow you to leave the facility without getting an alarm signal.
Indication
LED indicator at the front face of the Contact GSM-2 will inform you on exit\entering delay countdown or when the senor went off (alarm). In all of these cases Contact GSM-2 can make an audio signal with
the howler. If you think that the volume is not enough, you can install
an additional external siren to the panels output.
In those cases when full disguise of the security system is necessary, Contact GSM-2 allows to turn off all exterior indication. Along with
the sleep mode it essentially extends time of autonomous work when powered by the replaceable battery.
“Silent alarm”
If the robbery occurred, for your own safety it is better to report
an emergency situation to the security firm as unnoticeable as possible. You can find a special button «❄» on the key fob - it’s called “silent alarm”. If you press on it, the security system will inform security firm on robbery without using LED and sound indication, and without dragging any attention to it. If you turn off the exterior indication, it will make any alarm “silent alarm”.
Replaceable battery makes Contact GSM-2 fully automatic, which eases it’s assembling: you don’t need to take care of wire feeding. Contact GSM-2 will perfectly fit in the design of the room because of its size, nice design and lack of wires. In case it’s necessary (for example, to setup an exterior siren)
the security device works even from exterior power supply
of 12 V.
Arming
Ways to put Contact GSM-2 into armed position:
via Touch Memory keys,
via key fobs,
via external control contacts.
When you are entering a secured facility, it’s enough to press your
Touch Memory key to the readout device, to press the button on the
key fob or to intrude the external control contacts in order to disarm
the property.
Arming it is easy as well. Exit delay will allow you to leave the facility without getting an alarm signal.
Indication
LED indicator at the front face of the Contact GSM-2 will inform you on exit\entering delay countdown or when the senor went off (alarm). In all of these cases Contact GSM-2 can make an audio signal with
the howler. If you think that the volume is not enough, you can install
an additional external siren to the panels output.
In those cases when full disguise of the security system is necessary, Contact GSM-2 allows to turn off all exterior indication. Along with
the sleep mode it essentially extends time of autonomous work when powered by the replaceable battery.
“Silent alarm”
If the robbery occurred, for your own safety it is better to report
an emergency situation to the security firm as unnoticeable as possible. You can find a special button «❄» on the key fob - it’s called “silent alarm”. If you press on it, the security system will inform security firm on robbery without using LED and sound indication, and without dragging any attention to it. If you turn off the exterior indication, it will make any alarm “silent alarm”.