 |
Liquid sample injector “HT3100A”
Liquid sample injector “HT3100A” (manufactured by “LabHut” USA) is designed for automatic injection of liquid samples into chromatographs of “Crystallux” series, and also “Crystal-2000”, LHM, model-3700, “Tsvet” series, etc.
Part number:
Description
Technical characteristics
Number of analyzed samples — from 1 to 10.
Data exchange with PC — by standard interface RS-232С..
Data exchange with chromatograph — by specific interface (TTL-logic).
Vial volume for analyzes samples — 2,0, 2,5 ml.
Volume of injected sample — from 0,1 to 9,9 mcl (syringes 1, 5, 10 mcl), discreteness of sample injection — 0,1 mcl, from 10 to 500 mcl (syringes up to 500 mcl), with discreteness of sample injection — 1 mcl (8 syringes of different volumes in all).
Possibility of setting different modes of sample injection and syringe flush (like with sample so with 4 solvents up to 15 flushes during every sample injection or injection of group of samples).
Extraction of air bubbles from the syringe — up to 15 pumpings.
Sampling and injection speed — from 1 to 100 mcl/s.
Standby time before and after injection — from 0 to 99 s.
Viscosity delay during injection — from 0 to 15 s.
Possibility to inject the sample gradually into two evaporators.
Possibility of sample injection with inner standard and also sample splitting by air bubble, etc. Possibility of manual setting of the sampler for specific chromatograph by step-by-step programming from control panel, recording this setting parameters in memory.
Possibility of manual injection of the sample without dismantling of the sampler from the chromatograph.
Possibility to work with any gas chromatograph, including “Crystall”, “Crystallux” series, etc.
Electric power from single-phase network AC power with voltage from 198 to 242 V, frequency (50±1) Hz, power consumption - no more than 160 VA.
Overall dimensions (width×depth×height) — no more than 270×400×520 mm.
Mass — no more than 8 kg.
During work with chromatograph of “Crystallux” series sampler control is realized directly from chromatograph software without running additional programs.
Number of analyzed samples — from 1 to 10.
Data exchange with PC — by standard interface RS-232С..
Data exchange with chromatograph — by specific interface (TTL-logic).
Vial volume for analyzes samples — 2,0, 2,5 ml.
Volume of injected sample — from 0,1 to 9,9 mcl (syringes 1, 5, 10 mcl), discreteness of sample injection — 0,1 mcl, from 10 to 500 mcl (syringes up to 500 mcl), with discreteness of sample injection — 1 mcl (8 syringes of different volumes in all).
Possibility of setting different modes of sample injection and syringe flush (like with sample so with 4 solvents up to 15 flushes during every sample injection or injection of group of samples).
Extraction of air bubbles from the syringe — up to 15 pumpings.
Sampling and injection speed — from 1 to 100 mcl/s.
Standby time before and after injection — from 0 to 99 s.
Viscosity delay during injection — from 0 to 15 s.
Possibility to inject the sample gradually into two evaporators.
Possibility of sample injection with inner standard and also sample splitting by air bubble, etc. Possibility of manual setting of the sampler for specific chromatograph by step-by-step programming from control panel, recording this setting parameters in memory.
Possibility of manual injection of the sample without dismantling of the sampler from the chromatograph.
Possibility to work with any gas chromatograph, including “Crystall”, “Crystallux” series, etc.
Electric power from single-phase network AC power with voltage from 198 to 242 V, frequency (50±1) Hz, power consumption - no more than 160 VA.
Overall dimensions (width×depth×height) — no more than 270×400×520 mm.
Mass — no more than 8 kg.
During work with chromatograph of “Crystallux” series sampler control is realized directly from chromatograph software without running additional programs.