Main characteristics:

- Electrical power consumption: 0.9 kW
- Weight of the sterilizer: 13 kg
- Dimensions of the 5 liter sterilizer: 300*350*420 mm;
- Time to switch to 180 degree mode no more than 30 minutes
The sterilizer is powered by AC voltage 220 +- 10%, with a frequency of 50 Hz. The presence of a ground contact in the socket is mandatory.

Sterilizer «Ferroplast» with a loaded sterilization chamber must provide automatic support for temperature modes in the range of + 85 degrees to 180 degrees and the time of sterilization and disinfection exposure, as well as a user-programmable mode from 50 degrees to 200 degrees with an interval of 1 to 999 minutes.

The main distinctive features of sterilizers «Ferroplast» from analogues:

- compact, stylish and roomy
- almost silent (noise level 65 dBA)
- it has a heat-resistant handle, delayed start mode and drying mode
- reduced operating time and cooling time
- increase the surface for instrument sterilization by 50%

The sterilization chamber is designed by computer modeling in order to achieve maximum air injection, which allows you to place the instrument in the sterilization chamber on 5 shelves.