 |
Lamps light-signal LPSK
Semiconductor light-signal lamps in a metal-plastic housing with an integrated radiator are
intended for use as a red source in light devices for signaling, working or emergency lighting.
Part number:
Supplier:
The Ruselectronics holding companyDescription
It is allowed to use lamps in the lighting equipment of objects that pose a security risk to aircraft at
night or with poor visibility. The light distribution of LPSK-M lamps complies with the
requirements of AP-170 of the Interstate Aviation Committee (IAC) for low-intensity lights, and the
light distribution of LPSK-R lamps complies with the requirements of the manual for operation of
civil aerodromes.
Structurally, the lamps are made in an integral-modular design and comply with UHL 1 according
to GOST 15150 The lamps have increased mechanical strength and fire resistance. To increase
lightning resistance, a lamp provides galvanic isolation between the lamp supply voltage and the
mains voltage. To reduce the dependence of the change in light intensity on the change in the mains
voltage, a current stabilizer is provided in the lamp. The lamp has noise immunity from voltage
surges. MTBF of at least 50,000 hours.
The advantages of LPSK lamps:
low power consumption;
EMC compliance;
resistance to external influences;
certificate of conformity;
environmental Safety;
1 year warranty;
fire safety;
service life more than 10 years.
It is made at JSC “NIIPP”
night or with poor visibility. The light distribution of LPSK-M lamps complies with the
requirements of AP-170 of the Interstate Aviation Committee (IAC) for low-intensity lights, and the
light distribution of LPSK-R lamps complies with the requirements of the manual for operation of
civil aerodromes.
Structurally, the lamps are made in an integral-modular design and comply with UHL 1 according
to GOST 15150 The lamps have increased mechanical strength and fire resistance. To increase
lightning resistance, a lamp provides galvanic isolation between the lamp supply voltage and the
mains voltage. To reduce the dependence of the change in light intensity on the change in the mains
voltage, a current stabilizer is provided in the lamp. The lamp has noise immunity from voltage
surges. MTBF of at least 50,000 hours.
The advantages of LPSK lamps:
low power consumption;
EMC compliance;
resistance to external influences;
certificate of conformity;
environmental Safety;
1 year warranty;
fire safety;
service life more than 10 years.
It is made at JSC “NIIPP”
Specification
1. Технические_характеристики.docx