 |
NIKOMAX keystone jack module, tool-less, shielded, cat. 6
NIKOMAX Toolless jacks («NT» series), do not require a special tool for termination. The inner insert provides convenient and high quality termination with anhanced crosstalk characteristics. The jacks are fully compatible with all NIKOMAX components. Only 17 mm width and a standard height allows you to install them in any snap-in patch panels, including high density models with 0.5U height. NMC-KJSA2-NT-MT (Cat.6A), NMC-KJSE2-NT-MT (Cat.6) and NMC-KJSD2-NT- MT (CAT.5e) are made in fully shielded, zinc-aluminum alloy housing. After install, a shielded cable will be safely clamped between the hinged lid and the module’s built- in spring-loaded clip body. This design provides a constant and close contact with the screen, do not worsen over time.
Part number:
NMC-KJSE2-NT-MT
Supplier:
NETDC International Description
Characteristics:
Category 6
Bandwidth, MHz 250
Connection style Fully shielded
Compliance Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2
Supported applications 10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6 & 6А), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive
Temperature ranges Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C
Warranty 5 years - extended; 25 years - as part of the certified NIKOMAX SCS
Connector type RJ45/8P8C
Connector material in connector Phosphor bronze
Contact coating material Gold (50 micro-inches) over nickel (100 micro-inches)
Number of cable connections Not less than 750
Type of IDC contacts (seal) FT-TOOL fast-termination tool or 110 / KRON knives
Layout diagram T568A/B
IDC Contact material Phosphor bronze
IDC coating material Tin (100 micro-inches)
Plastic material High-strength, non-flammable, meets UL94V-0
Installation Patch panels, surface mount box, faceplate
Color Metallic (nickel)
Insulation resistance At least 500 MΩ (at a constant voltage of 100 V)
Maximum load-bearing capacity Up to 1000 V, 60 Hz for 1 minute
Contact resistance, μΩ Not more than 20
IDC Contact resistance, μΩ Not more than 2.5
Permissible diameter of conductors ~24-22 AWG (0.50-0.65 мм)
Format Keystone
Housing material Zinc-aluminum alloy
Dimensions (WxHxD), mm 17х19х40
Packaging Individual - Plastic bag
Category 6
Bandwidth, MHz 250
Connection style Fully shielded
Compliance Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2
Supported applications 10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6 & 6А), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive
Temperature ranges Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C
Warranty 5 years - extended; 25 years - as part of the certified NIKOMAX SCS
Connector type RJ45/8P8C
Connector material in connector Phosphor bronze
Contact coating material Gold (50 micro-inches) over nickel (100 micro-inches)
Number of cable connections Not less than 750
Type of IDC contacts (seal) FT-TOOL fast-termination tool or 110 / KRON knives
Layout diagram T568A/B
IDC Contact material Phosphor bronze
IDC coating material Tin (100 micro-inches)
Plastic material High-strength, non-flammable, meets UL94V-0
Installation Patch panels, surface mount box, faceplate
Color Metallic (nickel)
Insulation resistance At least 500 MΩ (at a constant voltage of 100 V)
Maximum load-bearing capacity Up to 1000 V, 60 Hz for 1 minute
Contact resistance, μΩ Not more than 20
IDC Contact resistance, μΩ Not more than 2.5
Permissible diameter of conductors ~24-22 AWG (0.50-0.65 мм)
Format Keystone
Housing material Zinc-aluminum alloy
Dimensions (WxHxD), mm 17х19х40
Packaging Individual - Plastic bag
Specification
1. keystonejack-shieldnt_series.pdf