For producing of the strip magnetic conductors are used the soft-iron amorphous alloys of all forms, on the basis of iron, cobalt, and nano-crystalline alloys.

Examples of the prepared magnetic conductors:
the toroidal cores, the rectangular cores

Technical characteristics of the toroidal cores:

Outer diameter of magnetic circuits, mm - to 1000

Minimum inside diameter, mm - 25

Thickness of interlayer insulating coating, µm - 1-3

Space factor > 0.7

Operational frequencies band, MHz - to 10

Cores are water and oil-resistant, vibration-proof.



Our advantages:

1. Experience: more than 20 years;

2. We make the large magnetic conductors (outer diameter to 1000 mm).

3. The technology of the production of strip magnetic circuits with the interlayer isolation is used.

Characteristics of the isolation:

· high breakdown voltage (more than 20V);

· heat resistance (to 600ºC);

The technology of putting isolation is protected by certificate of authorship.

4. Works are conducted in the special laboratory.

5. Is conducted the automated complex checking of the characteristics of magnetic circuit at the stages of production in connection with to operating conditions, which makes it possible to reduce down to zero defective indices:

· control in the process of annealing;

· the output control:

- checking characteristics with the low frequency of reversal of polarity (50 Hz),

- checking characteristics at the high speeds of reversal of polarity (to 10 T/µs).

Application of the magnetic conductors:

· the system of pulse roentgenography;

· accelerating systems;

· the device of diagnostics of the parameter of beam;

· the pulse power supplies and regulation;

· peak transformers;

· pulse converters;

· pulse chargers