LinteL KISH-20M4 AUTOMATIC SOFTENING POINT TESTER FOR PETROLEUM BITUMEN
LinteL KISH-20М4
AUTOMATIC SOFTENING POINT TESTER
FOR PETROLEUM BITUMEN
Standards implemented
GOST 11506-73
GOST 33142-2014
Part number:
Description
LinteL KISH-20М4 provides automatic sample preparation for testing, its testing and result
recording in non-volatile memory. All parameters and test condition required are maintained
automatically
Possibility of quantity selection for cells with samples provides testing of up to 4 samples
simultaneously
Test log maintenance provides storage of up to 300 test results
Integration with LinteL Link Data Collection System enables collection and transfer of laboratory
test results from the tester to a personal computer via wireless communication. Integration with the
laboratory information system LinteL LIS, provides a comprehensive automation of laboratory activities
Automatic stirring system provide uniform temperature in the bath
Termination of stirrer rotation and liquid heating in the bath: at test completion;upon operator’s
request;when current temperature exceeds limit value
To check the tester readings while certification and calibrate built-in temperature sensor provision is
made for standard thermometer installation
Operator interface based on color display with touchscreen simplifies mastering and everyday
operation of the tester
Complete self-diagnosis system with fault indication on the display
Test stop at the end of analysis with audible alarm
recording in non-volatile memory. All parameters and test condition required are maintained
automatically
Possibility of quantity selection for cells with samples provides testing of up to 4 samples
simultaneously
Test log maintenance provides storage of up to 300 test results
Integration with LinteL Link Data Collection System enables collection and transfer of laboratory
test results from the tester to a personal computer via wireless communication. Integration with the
laboratory information system LinteL LIS, provides a comprehensive automation of laboratory activities
Automatic stirring system provide uniform temperature in the bath
Termination of stirrer rotation and liquid heating in the bath: at test completion;upon operator’s
request;when current temperature exceeds limit value
To check the tester readings while certification and calibrate built-in temperature sensor provision is
made for standard thermometer installation
Operator interface based on color display with touchscreen simplifies mastering and everyday
operation of the tester
Complete self-diagnosis system with fault indication on the display
Test stop at the end of analysis with audible alarm