The stations, depending on the version, are used to work in one of two frequency bands:
C-band:
for transmission from 5832 to 6268 MHz;
on reception from 3507 to 3943 MHz.
Ku-band:
for transmission: from 14,000 to 14,500 MHz
at the reception: from 10950 to 11450 MHz.
Group data transfer rate in stations from 2.0 Mbps to 10.0 Mbps.
The composition of the subscriber station equipment:
antenna post,
high frequency equipment
channel-forming equipment,
cable kit
mounting kit.
Channel-forming station equipment provides:
E1 stream connection via ITU-T G.703 interface;

office telephone communication with an information transfer rate of 8 kbps. Subscriber termination with FXSP interface - two-wire;

Digital channel connection via C1-FL-BI interface in accordance with GOST 27232-87 with an information transfer rate of 8 kbit / s. Subscriber termination with FXSP interface - two-wire;

connection of the telephone channel (for inclusion in the PSTN) with an information transfer rate of 8 kbit / s. Subscriber termination with FXSP interface - two-wire;

transmission of voice and facsimile information according to ITU-T Rec. G.723.1 with a speed of 6.4 kbit / s or 4.8 kbit / s via a two-wire interface with a telephone set (FXSP with a built-in call signal generator) and a PBX extension (FXO );

connection of data exchange channels with RS-232 (DCE) interface with a speed of 9.6 kbit / s.

10/100 Base-T interface connection to access the Internet at data rates up to 1.5 Mbps;

10/100 Base-T interface connection for interfacing with customer’s additional equipment.

The stations are equipped with a CDM modem or a UHP-1000 satellite router.

In addition, when installed on request by the customer (option), additional channel equipment in the stations ensures that it is possible to additionally transmit information with channel terminations of BCC, PM, SC, AC, etc.

Components placed in the open air, according to the operating conditions, belong to the classification group 1.10 of the climatic version of UHL, comply with the requirements of GOST RV20.39.304-98 and ensure operability when exposed to the following external factors:

high humidity (95 ± 3)% at a temperature of (25 ± 2) ° С;

working low temperature (minus 40 ± 2) ° С;

working elevated temperature (50 ± 2) ° С.

Component parts of products placed in stationary rooms, according to the operating conditions, belong to the classification group 1.1 of the climatic version of UHL, comply with the requirements of GOST RV20.39.304-98 and ensure operability under the influence of the following external factors:

high humidity (80 ± 3)% at a temperature of (25 ± 2) ° С;

working low temperature (5 ± 2) ° С;

working elevated temperature (40 ± 2) ° С;

extreme low temperature (minus 10 ± 2) ° С