Testing and technological run of the blocks and products of electronic equipment on the following parameters:
testing for strength and stability under the influence of sinusoidal vibration (in the frequency range of 63 - 500 Hz, with acceleration up to 10 G) and mechanical shocks of repeated action (with peak impact acceleration up to 500 G) using the vibration stands SV-2M, UVM 60/60, 12МВ-100, TIRAvip 5142, G-0215, i230 / SA2M, VP-180, impact stands SPS -80, TIRAshock -4110, StT-500;

testing for the impact of low (up to –75 ° C) and high (up to + 180 ° C) ambient temperature using climatic chambers MS-71, MS -81, PSL-2 E, 3522/51, 3626/51, PL- 1 E, PSL -2 E, KTP-0, 7, TV-1000, SMS-2, ARS-0680, ARS-0220AE;

test for the effect of temperature cycles (from –75 ° C to + 180 ° C) using climate chambers MS-71, MS-81, PSL-2 E, 3522/51, 3626/51, PL-1 E, PSL-2 E, KTP-0, 7, TV-1000, SMS-2, ARS-0680, ARS-0220AE;

test for exposure to high humidity (98% at temperatures up to + 55 ° C) using climatic chambers PSL-2 E, 3626/51, КТК-3000, SMS-2, ARS-0680, ARS-0220AE;

Condensation (frost and dew) impact test using climate chambers 3626/51, TV-1000, SMS-2, ARS-0680, ARS-0220AE;

a test for the effect of atmospheric reduced pressure (at a temperature of from –50 ° C to + 55 ° C and pressure up to 1.2 x 10 -4 PA-90 mm Hg) using thermal barriers STBV-1000, TBV-2000, MZT- 11H-H;

sand and dust test using the UP-3M dust chamber;

strength test during the transportation of products in packaged form (with peak acceleration up to 15 G and weight up to 300 kg) using the SIT-M transportation simulation stand.