 |
Station of preparation and giving of electrolyte sppe-10
The SPPE-10 station is intended for preparation, storage and supply of electrolyte (a water salt solution) into the zone of electrochemical processing consisting EHS-5000 machine and similar ones.
Part number:
Description
Technical characteristics:
Storage and electrolyte preparation unit:
Volume of a tank (one), not less, than a litres 6000
Electrolyte thermostabilization unit:
Electrolyte temperature (it is supported with accuracy ± 2 °С ), °С from 20 to 50
Heating elements capacity, kW 2 x 120
The area of a surface of heatreturn of the lamellar heat exchanger, sq.m 2 x 8
Electrolyte clearing unit (the poppet separator with automatic periodic discharge of sludge):
Concentration of sludge in electrolyte, no more, than g/l 0.5
Unit of cleaning of ions of Cr6 +:
Concentration of ions of Cr6 + no more, mg/l 0.1
The electrolyte suply unit in a zone ECHO:
Number of pumps 10
Nominal flow rate, м3/hour 10
Working pressure at a nominal expense, not less, than a MPa 1.0
The management case of SPPE-10 provides operator with digital indication about parameters of electrolyte - temperature, electric conductivity, the pH, the concentration of Cr6 +, pressure and flow rate of the electrolyte.
Storage and electrolyte preparation unit:
Volume of a tank (one), not less, than a litres 6000
Electrolyte thermostabilization unit:
Electrolyte temperature (it is supported with accuracy ± 2 °С ), °С from 20 to 50
Heating elements capacity, kW 2 x 120
The area of a surface of heatreturn of the lamellar heat exchanger, sq.m 2 x 8
Electrolyte clearing unit (the poppet separator with automatic periodic discharge of sludge):
Concentration of sludge in electrolyte, no more, than g/l 0.5
Unit of cleaning of ions of Cr6 +:
Concentration of ions of Cr6 + no more, mg/l 0.1
The electrolyte suply unit in a zone ECHO:
Number of pumps 10
Nominal flow rate, м3/hour 10
Working pressure at a nominal expense, not less, than a MPa 1.0
The management case of SPPE-10 provides operator with digital indication about parameters of electrolyte - temperature, electric conductivity, the pH, the concentration of Cr6 +, pressure and flow rate of the electrolyte.