Line Com is an ideal solution for communication between subscribers, airborne objects and the control center, including for the construction of adaptive and rapidly reconfigurable networks.

The Line Com radio system is a communication system built using standard network protocols and open system principles, it is scalable, mobile, integrated and easily manageable, transmits high-quality video and telemetry signals with low delay.

The Line Com radio system consists of airborne and ground segments, which, in turn, include transceivers (the core of the radio system) of LTR-HD half-duplex communication or LTR-FD full-duplex communication (Modems of type “U” according to the classification “Concepts for building information exchange systems” ).

Main characteristics of Line Com:
low latency compressed image transmission;
support for multi-video sensors;
support for auto tracking functions;
noise immunity;
very low power consumption;
small weight and dimensions.

Inputs and outputs:
three separate analog video inputs with the possibility of multiplexing in time
four RS-232 data transmission ports (1 port) *;
four RS-485/422 data transfer ports (1 port) *;
10 GPI / O for potential expansion
LVDS (Camera Link);
one Ethernet 10/100 port (UDP, ARP, ICMP, Serial over IP).

Video analog video NTSC or PAL:
video input 0.5-2 Vpp / 75 Ohm;
JPEG2000 video compression.

Specifications:
video delay 100ms;
frequency range “S” (“L”, “C” option);
range of 25 km.

NUTRITION REQUIREMENTS 25 / 0,1 / 2 • 10-7
mains voltage 9-36 V (from a direct current network);
consumption power 25 (12) * W.

TRANSMITTER:
output power up to 1 W;
BPSK modulation, QPSK;
maximum data rate 20 (typical 5.4) Mbps.
RECEIVER:
sensitivity -123 dB (W) (at 5.4 Mbps);
dynamic range 60 dB;
8 MHz bandwidth (varies by software);
coordinate measurement error (RMS);
range 3 m;
along the corner 10`.

TERMS AND CONDITIONS:
temperature from -40С to + 50С;
humidity 98% (at + 25C).
MECHANICAL CHARACTERISTICS:
Dimensions 110x115x40 (95x100x12) * mm;
weight 0.3 (0.12) * kg