.jpg) |
MR-10 geodesic satellite multi-frequency equipment
The multi frequency satellite geodetic equipment МР-10 is intended for surveying research, supervision of building process, high accuracy positioning during creation and development of reference geodetic networks and also for the purposes of cadastre, land management, agriculture, geophysics. It is monitored with the help of a P-6 controller that is connected by interface cable or via Bluetooth and also with the help of external Android device with special software eSurvey. It is equipped with auxiliary inertial system and electronic level that allow to carry out survey in the localities with difficult conditions.
Part number:
Supplier:
Shvabe Description
Communication and data storage
Serial connection
USB v2.0: support for data download and high-speed connections
USB-radio modem with frequency band 433-450 MHz
Built-in GSM-modem
WiFi: 802.11 b, g, access point and client modes, WPA / WPA2 / WEP64 / WEP128 encryption
External devices for receiving / transmitting data - via serial port, USB port and Bluetooth
Built-in memory 4 GB + microSD slot, up to 32 GB
Scope of delivery
Rechargeable battery
Charger
An adapter for the charger (for connection to power grids in the Russian Federation)
VHF antenna
GSM antenna
Tape-measure
Plate (for height measurement)
Cable for data reception and output
Transport case
Stand for fastening the smart antenna
Rotary adapter
Quick release adapter
Passport
StaticToRinex Software (on CD)
GGO Software (on CD)
Instruction manual (on CD).
Software
The smart antenna comes with built-in software. This software allows to carry out the measurement in the field. The software also includes post-processing software: "StaticToRinex" and "GEO Geomatics Office" (GGO), installed on a PC. This software provides for the smart antenna modules interfacing, setting up and controlling the workflow, storing and transmitting the measurement results, and post-processing of the measured data. Software protection against unintentional and deliberate changes corresponds to the "High" level in accordance with R 50.2.077-2014.
Produced at JSC “Production Association “Ural Optical and Mechanical Plant” named after E.S.Yalamov”
Serial connection
USB v2.0: support for data download and high-speed connections
USB-radio modem with frequency band 433-450 MHz
Built-in GSM-modem
WiFi: 802.11 b, g, access point and client modes, WPA / WPA2 / WEP64 / WEP128 encryption
External devices for receiving / transmitting data - via serial port, USB port and Bluetooth
Built-in memory 4 GB + microSD slot, up to 32 GB
Scope of delivery
Rechargeable battery
Charger
An adapter for the charger (for connection to power grids in the Russian Federation)
VHF antenna
GSM antenna
Tape-measure
Plate (for height measurement)
Cable for data reception and output
Transport case
Stand for fastening the smart antenna
Rotary adapter
Quick release adapter
Passport
StaticToRinex Software (on CD)
GGO Software (on CD)
Instruction manual (on CD).
Software
The smart antenna comes with built-in software. This software allows to carry out the measurement in the field. The software also includes post-processing software: "StaticToRinex" and "GEO Geomatics Office" (GGO), installed on a PC. This software provides for the smart antenna modules interfacing, setting up and controlling the workflow, storing and transmitting the measurement results, and post-processing of the measured data. Software protection against unintentional and deliberate changes corresponds to the "High" level in accordance with R 50.2.077-2014.
Produced at JSC “Production Association “Ural Optical and Mechanical Plant” named after E.S.Yalamov”
Specification
1. Specification__RUS_ENG.docx2. Catalogue_Surveying_equipment_UOMP_(1).pdf
3. ГЕОДЕЗИЧЕСКОЕ_ОБОРУДОВАНИЕ.pdf