 |
Automatic high viscosity materials supercharger
Automatic high viscosity materials supercharger is designed for discharge to the nodes of the shut-off
valves flushing, lubricating and sealing materials to reduce or eliminate valve leakage during operation
and maintenance of cranes; to work with various units and mechanisms, requiring discharge them under
high pressure up to 50 MPa technological compounds and lubricants; to create a predetermined
excessive hydraulic pressure in containers and vessels for various purposes.
Part number:
Supplier:
JSC SozvezdieDescription
Field of use: gas and oil pipelines.
Principle of operation
ANUVM is a supercharger in which a gas (air) pressure acts on the piston of the pneumatic actuator, the
stem of which is connected to the pump plunger and communicates with the operating material,
pumping it to the high-pressure hose in knots gaskets valves or other equipment.
ANUVM consists of a plunger pump, pneumatic actuator, filling tank and a set of connecting equipment
mounted on a trolley.
Type of supercharger, modular
The working environment at the inlet to the gas reducer natural gas GOST5542-87 or compressed air is
not coarser than 10 pollution class according to GOST17 433-80
The pressure of natural gas (compressed air), hereinafter-gas, at the inlet of the gas reducer from 0.8 to
15 MPa
The working pressure of the blower actuator from 0.2 to 0.8 MPa
Discharge pressure of washing, lubricating and sealing materials at the outlet of the supercharger up to
50mpa
Filling volume of the injected material 4500 cm3
Gas consumption at injection of 1000 cm3 of various materials at backpressure 0 MPa not more than 0,5
m3
The performance of the supercharger at a pressure of 10 MPa, at least 400 cm3/min.
Dry weight of the supercharger not more than 38 kg
Working pressure of pneumatic actuator and filling tank up to 1 MPa
Pressure of operation of the safety valve of the gas reducer (1,6 ± About, 1) MPa
Actuation pressure of the pressure regulator included in the gas distribution unit (1,2 ± 0,02) MPa
Climatic version of the product TU1 GOST15150-69
The supercharger keeps the parameters and appearance within normal LIMITS:
- during exposure to reduced operating temperature limit to minus 30 °C;
- during exposure to elevated operating temperatures up to plus 55 °C
after exposure to high humidity 98 % at a temperature of plus 25 °C
The assigned service life of the product is not less than 15 years
The assigned service life of the product during the assigned service life of 20,000 hours.
Competitive advantage
Market analysis shows that the greatest demand among the superchargers purchased for the
maintenance of shut-off valves used on gas and oil pipelines are products:
with the pressure of the injected material at the outlet of the high pressure hose not less than 50 MPa;
operating in automatic mode from natural gas (air);
with a filling capacity of at least 4000 cm3.
Automatic supercharger of high-viscosity materials ANUVM differs from other similar products by
increased reliability due to the equipment of high and low pressure circuits with pressure relief devices,
which allows to ensure high performance properties of the product. The cost of ANUVM is approximately 1.5 times lower ... 2 times similar products of domestic and foreign production.
Principle of operation
ANUVM is a supercharger in which a gas (air) pressure acts on the piston of the pneumatic actuator, the
stem of which is connected to the pump plunger and communicates with the operating material,
pumping it to the high-pressure hose in knots gaskets valves or other equipment.
ANUVM consists of a plunger pump, pneumatic actuator, filling tank and a set of connecting equipment
mounted on a trolley.
Type of supercharger, modular
The working environment at the inlet to the gas reducer natural gas GOST5542-87 or compressed air is
not coarser than 10 pollution class according to GOST17 433-80
The pressure of natural gas (compressed air), hereinafter-gas, at the inlet of the gas reducer from 0.8 to
15 MPa
The working pressure of the blower actuator from 0.2 to 0.8 MPa
Discharge pressure of washing, lubricating and sealing materials at the outlet of the supercharger up to
50mpa
Filling volume of the injected material 4500 cm3
Gas consumption at injection of 1000 cm3 of various materials at backpressure 0 MPa not more than 0,5
m3
The performance of the supercharger at a pressure of 10 MPa, at least 400 cm3/min.
Dry weight of the supercharger not more than 38 kg
Working pressure of pneumatic actuator and filling tank up to 1 MPa
Pressure of operation of the safety valve of the gas reducer (1,6 ± About, 1) MPa
Actuation pressure of the pressure regulator included in the gas distribution unit (1,2 ± 0,02) MPa
Climatic version of the product TU1 GOST15150-69
The supercharger keeps the parameters and appearance within normal LIMITS:
- during exposure to reduced operating temperature limit to minus 30 °C;
- during exposure to elevated operating temperatures up to plus 55 °C
after exposure to high humidity 98 % at a temperature of plus 25 °C
The assigned service life of the product is not less than 15 years
The assigned service life of the product during the assigned service life of 20,000 hours.
Competitive advantage
Market analysis shows that the greatest demand among the superchargers purchased for the
maintenance of shut-off valves used on gas and oil pipelines are products:
with the pressure of the injected material at the outlet of the high pressure hose not less than 50 MPa;
operating in automatic mode from natural gas (air);
with a filling capacity of at least 4000 cm3.
Automatic supercharger of high-viscosity materials ANUVM differs from other similar products by
increased reliability due to the equipment of high and low pressure circuits with pressure relief devices,
which allows to ensure high performance properties of the product. The cost of ANUVM is approximately 1.5 times lower ... 2 times similar products of domestic and foreign production.