 |
Two-Axes Dynamical Tilt Stand with Integral Electronics NPS-2M
The stand is designed for determination of angular velocities and angular position during tests and calibration of navigation, orientation, and control systems, as well as inertial measurement units.
The stand consists of two frames with axes on racks. The control of frames and velocity monitoring are realized be means of three electronic modules embedded in racks and by the PC.
Part number:
Description
SPECIFICATIONS
Power supply 220 V; 50 Hz
Maximum power consumption:
- short-term 350 W
- sustain 100 W
Tilt angle by two axes unlimited
Minimum velocity ± 0,015°/с
Maximum velocity:
- external axis 300°/с
- internal axis 500°/с
Error of angular velocity determination, 0,003 % (<10 °/c)
- averaged during turn 0,03 %
Error of angular position determination (σ):
- random 1'
- discrete 11,25º 10"
Quantity of electric circuit
with current load 1А, 2А, 3А 90
Weight 330 kg
Dimensions of the stand 1200 х 1000 х 1040 mm
Dimensions of testing unit 386 х 340 х 270 mm
Maximum weight of testing unit 25 kg
Power supply 220 V; 50 Hz
Maximum power consumption:
- short-term 350 W
- sustain 100 W
Tilt angle by two axes unlimited
Minimum velocity ± 0,015°/с
Maximum velocity:
- external axis 300°/с
- internal axis 500°/с
Error of angular velocity determination, 0,003 % (<10 °/c)
- averaged during turn 0,03 %
Error of angular position determination (σ):
- random 1'
- discrete 11,25º 10"
Quantity of electric circuit
with current load 1А, 2А, 3А 90
Weight 330 kg
Dimensions of the stand 1200 х 1000 х 1040 mm
Dimensions of testing unit 386 х 340 х 270 mm
Maximum weight of testing unit 25 kg