 |
Neuro-MEP-8
Full-featured 8-channel NCS, EMG and Multi-modality EP System
Part number:
Supplier:
NeurosoftDescription
Main Features:
8 high-quality acquisition channels
easy-to-use EMG system of expert class
multi-modality EP in base delivery set
EMG according to International standards
modular architecture
8 High-quality Acquisition Channels
The device contains 8 high-quality channels with both touch-proof and DIN outputs. Noise-free EMG signals allow using device both for routine EMG studies and during the intraoperative neurophysiological monitoring.
Easy-to-use EMG System of Expert Class
Neuro-MEP-8 takes the convenience and ergonomics of EMG systems to the next level.
Using the dedicated keyboard you can easily start and stop the stimulation, change the stimulus intensity and duration, arrange marker positions, run new tests, start signal monitoring, enter the measured distance, etc. The adjustable electro stimulating probe is equipped with buttons to run single and repetitive stimulation , separate button to change the stimulus polarity and scroller to increase/decrease the stimulus intensity. This probe is convenient to use for right-handed and left-handed specialists. The footswitch with software-controlled buttons to run and stop stimulation frees your hands and lets you focus on complex nerve searching. In case of an infant you can pay more attention to a patient.
Multi-modality EP in Base Delivery Set
Sometimes the myography can not answer all diagnostic questions. Often a neurophysiologist should study also the evoked potentials. Neuro-MEP-8 has built-in stimulators to record EP of all modalities. Besides, the unique software makes this process quick and easy.
EMG According to International Standards
Using Neuro-MEP-8 you can perform almost all known EMG, NCS and EP techniques. In recent decades the technique standards are accepted and established. These are special algorithms to study different pathologies, calculations intended for each test, reference values, etc. It is very important for a professional to be equipped with all the techniques even if some of them are used rare. The list of tests made with Neuro-MEP-8 meets the International standards of EMG and EP study.
Modular Architecture
Neuro-MEP-8 consists of the following units:
two 4-channel amplifiers
auditory-visual stimulator
electrical stimulator
wireless keyboard to quickly execute the most often used commands.
footswitch
All electronic units are connected to computer via USB. It allows combining them flexibly to arrange a configuration corresponding to your own requirements. For example, to solve intraoperative neurophysiological monitoring tasks, you can use four 4-channel amplifiers instead of two ones and plug in direct nerve stimulator instead of electrical stimulator. To study sensory conduction collision plug in the second electrical stimulator into available USB port.
It is possible to connect up to 10 different USB units in different configurations.
Neuro-MEP amplifier unit – 2 pcs.
Auditory-visual stimulator unit – 1 pcs.
Neuro-MEР electrical stimulator control unit – 1 pcs.
Holder – 1 pcs.
Holder mount – 1 pcs.
Mounting plate for two amplifier units – 1 pcs.
Dedicated keyboard DK-02 with cable and bluetooth adapter – 1 pcs.
Dedicated keyboard DK-02 1pcs.
USB — Bluetooth adapter 1pcs.
USB сable, А-В, 1,8 m 1pcs.
Technical Manual "DK-02" 1pcs.
Package 1pcs.
Patient button – 1 pcs.
Footswitch (with USB connector) – 1 pcs.
USB сable, А-В, 1,8 m – 2 pcs.
SVGA extension cable – 1 pcs.
Auditory stimulator TDH-39 (headphones), 3.5 stereo – 1 pcs.
Visual stimulator (LED goggles) – 1 pcs.
Electrode adhesive paste TEN20 (114 g.) – 1 pcs.
Abrasive paste for skin preparation Everi (160 g.) – 1 pcs.
Stimulating bar electrode (adult) SBE-2 – 1 pcs.
Adjustable electro stimulating probe AESP-1 – 1 pcs.
Cup electrode with cable (8 pcs., 1 m) – 2 pcs.
Ring electrode (wide) with cable RE-2 – 1 pcs.
Ground electrode with cable (pediatric) (250 mm) GE-1 – 1 pcs.
Ground electrode with cable (adult) (400 mm) GE-2 – 1 pcs.
Bar electrode (pediatric) BE-1 – 1 pcs.
Bar electrode (adult) BE-2 – 1 pcs.
Surface electrode with cable SE-1 – 2 pcs.
Disposable concentric EMG needle electrode B50600 – 25 pcs.
Reusable cable for concentric needle electrode D60451 – 2 pcs.
Disposable ECG electrode F9049 (Fiab, Italy) 22x34 mm – 100 pcs.
Cable for disposable electrode: “Alligator” clip - touch-proof – 1 pcs.
Cable for disposable electrode: “Alligator” clip - touch-proof – 1 pcs.
Y-adapter – 5 pcs.
Measuring reel – 1 pcs.
USB hub with cable KM-7-2 – 2 pcs.
USB сable, А-В, 1,8 m 1pcs.
KM-7-2 USB-hub 1pcs.
Power supply cord 220 (black) 1pcs.
Technical Manual "КМ-7, KM-7-2" 1pcs.
Electrode holder – 1 pcs.
Marker – 1 pcs.
Medical tape Transpore (5 sm х 9.1 m) – 1 pcs.
Technical Manual "Neuro-MEP", "Neuro-ERG" – 1 pcs.
Guidelines "EMG Studies Performing on Digital EMG and EP Systems Manufactured by Neurosoft Ltd." – 1 pcs.
Transportation bag – 1 pcs.
Transportation bag – 1 pcs.
License for Neuro-MEP.NET software with additional Neuro-MEP.NET/EP software module – 1 pcs.
License for the use of software "Neuro-MEP.NET" with additional software module "Neuro-MEP.NET/EMG" – 1 pcs.
License for the use of software "Neuro-MEP.NET" with additional software module "Neuro-MEP.NET/HW" – 1 pcs.
8 high-quality acquisition channels
easy-to-use EMG system of expert class
multi-modality EP in base delivery set
EMG according to International standards
modular architecture
8 High-quality Acquisition Channels
The device contains 8 high-quality channels with both touch-proof and DIN outputs. Noise-free EMG signals allow using device both for routine EMG studies and during the intraoperative neurophysiological monitoring.
Easy-to-use EMG System of Expert Class
Neuro-MEP-8 takes the convenience and ergonomics of EMG systems to the next level.
Using the dedicated keyboard you can easily start and stop the stimulation, change the stimulus intensity and duration, arrange marker positions, run new tests, start signal monitoring, enter the measured distance, etc. The adjustable electro stimulating probe is equipped with buttons to run single and repetitive stimulation , separate button to change the stimulus polarity and scroller to increase/decrease the stimulus intensity. This probe is convenient to use for right-handed and left-handed specialists. The footswitch with software-controlled buttons to run and stop stimulation frees your hands and lets you focus on complex nerve searching. In case of an infant you can pay more attention to a patient.
Multi-modality EP in Base Delivery Set
Sometimes the myography can not answer all diagnostic questions. Often a neurophysiologist should study also the evoked potentials. Neuro-MEP-8 has built-in stimulators to record EP of all modalities. Besides, the unique software makes this process quick and easy.
EMG According to International Standards
Using Neuro-MEP-8 you can perform almost all known EMG, NCS and EP techniques. In recent decades the technique standards are accepted and established. These are special algorithms to study different pathologies, calculations intended for each test, reference values, etc. It is very important for a professional to be equipped with all the techniques even if some of them are used rare. The list of tests made with Neuro-MEP-8 meets the International standards of EMG and EP study.
Modular Architecture
Neuro-MEP-8 consists of the following units:
two 4-channel amplifiers
auditory-visual stimulator
electrical stimulator
wireless keyboard to quickly execute the most often used commands.
footswitch
All electronic units are connected to computer via USB. It allows combining them flexibly to arrange a configuration corresponding to your own requirements. For example, to solve intraoperative neurophysiological monitoring tasks, you can use four 4-channel amplifiers instead of two ones and plug in direct nerve stimulator instead of electrical stimulator. To study sensory conduction collision plug in the second electrical stimulator into available USB port.
It is possible to connect up to 10 different USB units in different configurations.
Neuro-MEP amplifier unit – 2 pcs.
Auditory-visual stimulator unit – 1 pcs.
Neuro-MEР electrical stimulator control unit – 1 pcs.
Holder – 1 pcs.
Holder mount – 1 pcs.
Mounting plate for two amplifier units – 1 pcs.
Dedicated keyboard DK-02 with cable and bluetooth adapter – 1 pcs.
Dedicated keyboard DK-02 1pcs.
USB — Bluetooth adapter 1pcs.
USB сable, А-В, 1,8 m 1pcs.
Technical Manual "DK-02" 1pcs.
Package 1pcs.
Patient button – 1 pcs.
Footswitch (with USB connector) – 1 pcs.
USB сable, А-В, 1,8 m – 2 pcs.
SVGA extension cable – 1 pcs.
Auditory stimulator TDH-39 (headphones), 3.5 stereo – 1 pcs.
Visual stimulator (LED goggles) – 1 pcs.
Electrode adhesive paste TEN20 (114 g.) – 1 pcs.
Abrasive paste for skin preparation Everi (160 g.) – 1 pcs.
Stimulating bar electrode (adult) SBE-2 – 1 pcs.
Adjustable electro stimulating probe AESP-1 – 1 pcs.
Cup electrode with cable (8 pcs., 1 m) – 2 pcs.
Ring electrode (wide) with cable RE-2 – 1 pcs.
Ground electrode with cable (pediatric) (250 mm) GE-1 – 1 pcs.
Ground electrode with cable (adult) (400 mm) GE-2 – 1 pcs.
Bar electrode (pediatric) BE-1 – 1 pcs.
Bar electrode (adult) BE-2 – 1 pcs.
Surface electrode with cable SE-1 – 2 pcs.
Disposable concentric EMG needle electrode B50600 – 25 pcs.
Reusable cable for concentric needle electrode D60451 – 2 pcs.
Disposable ECG electrode F9049 (Fiab, Italy) 22x34 mm – 100 pcs.
Cable for disposable electrode: “Alligator” clip - touch-proof – 1 pcs.
Cable for disposable electrode: “Alligator” clip - touch-proof – 1 pcs.
Y-adapter – 5 pcs.
Measuring reel – 1 pcs.
USB hub with cable KM-7-2 – 2 pcs.
USB сable, А-В, 1,8 m 1pcs.
KM-7-2 USB-hub 1pcs.
Power supply cord 220 (black) 1pcs.
Technical Manual "КМ-7, KM-7-2" 1pcs.
Electrode holder – 1 pcs.
Marker – 1 pcs.
Medical tape Transpore (5 sm х 9.1 m) – 1 pcs.
Technical Manual "Neuro-MEP", "Neuro-ERG" – 1 pcs.
Guidelines "EMG Studies Performing on Digital EMG and EP Systems Manufactured by Neurosoft Ltd." – 1 pcs.
Transportation bag – 1 pcs.
Transportation bag – 1 pcs.
License for Neuro-MEP.NET software with additional Neuro-MEP.NET/EP software module – 1 pcs.
License for the use of software "Neuro-MEP.NET" with additional software module "Neuro-MEP.NET/EMG" – 1 pcs.
License for the use of software "Neuro-MEP.NET" with additional software module "Neuro-MEP.NET/HW" – 1 pcs.