In particular, you can connect the sensors of type 009 and sensors of performance 010. It provides the conversion of the signal to the specified units of measurement, concentration display, control of external devices and provides audible and visual alarms. All settings are done programmatically. Structurally, the device is made in a body made of polycarbonate with a transparent cover. The body has brackets for wall mounting. Power is supplied from an external source. The nominal supply voltage is 24 volts. The console has a digital indication and a current output in the standard 4 - 20 mA. In order to fulfill the explosion protection requirements for the operation of gas detectors of the IGS-98 series, it is necessary to comply with the requirements for the parameters of intrinsically safe electrical circuits of electrical equipment that are connected to the connecting devices of a stationary gas detector labeled with an "intrinsically safe circuit", including the parameters of connecting cables and wires. In the connection circuit of the remote sensor, an explosion protection barrier is integrated.