Forest fire caterpillar Onegerz-310 with a set of additional equipment is a universal forest machine designed to fight forest fires in hard-to-reach places mechanized way, localize forest fires by laying barrage and support strips, extinguishing the edges of fires with water, foam or fire extinguishing emulsions, and also for production of other forestry works. The tractor can be used as a pumping station for water supply. With the help of the pusher can perform light earthwork and work on the preparation of dies, loading areas, repair of mustaches and roads, the hilling of packs of trees. With the help of a winch, it is possible to remove blockages, skidding individual trees.

The machine includes:
1. The plow of the forest submarine-2. It is designed to clean the soil of combustible materials (stumps, roots and felling residues), create fire breaks and mineralized strips, and install a soil protective comb to extinguish fires on slopes to delay slipping burning materials.

- Furrow parameters, m

Depth 0,5

Width 1.0

- Weight of the plow, kg 700

2. Rear lift-mounted device SNL-3. It is designed to be used as a tool for combating forest fires and various forestry tools.

3. Winch:

- Cable traction of winch, m 40

- Maximum winch pulling force, kN 105;

4. Tank:

- Capacity, l 3500;

5. The pump is a water combined NCPK-40 / 100-4 / 400. It is intended for water supply and water solutions of foaming agents.

- Pump type centrifugal

combined;

- Nominal delivery, l / s

Normal pressure levels 40

High Pressure Steps 4

- Head in nominal mode, m, not less than

Normal pressure levels 100

High-pressure stages 400

- Power in nominal mode, hp, not more than 80

- Maximum geometric suction height, m ​​7,5

- Pump flow with the greatest geometric

suction head and nominal head, l / s, 20

- Manual dosing type with gradual change

concentration

in the entire range

regulation

- Dosing level of foaming,% 6.2 ± 1.2 3.0 ± 0.6

- Rated supply voltage, V 24

- Total weight, kg, not more than 155

6. The barrel is a high-pressure sprayer with a hose reel SRVKD-2 / 400-60 A (B). It is intended for formation and direction of a continuous or finely dispersed jet of water and air-mechanical foam.

- Nominal head at the entrance to the coil, m 400

- Maximum pressure at the entrance to the coil, kgf / cm2 50

- Water flow in nominal mode, l / s

Continuous jet 2.0-0.2

Sprayed jet 2.0-0.2

- Productivity by formation of air-

mechanical foam, m3 / min 1,1-0,2

- Maximum jet range, m, not less than

Water continuous 23

Water spray 15

Foam 15

- Effective range of the sprayed jet, m 10

- Sleeve length on reel, m 60

- Weight of the barrel-sprayer, kg, no more than

With a foam nozzle 2.5

Without foam nozzle 2,2

- Barrel weight with coil, kg, no more than 70

7. Portable hydromonitor "EFER" LS-P20U.

8. The barrel is hand-made universal with the foam generator ORT-50

9. Set of pressure hoses.

10. Set of suction hoses.

11. Suction grid with a valve.

12. Fire suit BOP-P