 |
ELECTRON-BEAM INSTALLATION FOR DISINFECTION OF THE SEWAGE AND OTHER WASTES
The principle of installation action is based on processing of waste waters and wastes by a powerful beam of the electron accelerator. Both the Russian and foreign experience for last 10 years has proved high efficiency of this method and its universality for disinfecting of a wide spectrum of harmful impurities and pathogenic microflora. In many cases processing by an electron irradiation is the only way allowing to get positive result. For example, neutralization of water or industrial wastes with the high content of toxic organic impurities or ions of heavy metals cannot be carried out by any other of known methods because of high resistance of these products to influence of chemical reactants and heat
Part number:
Supplier:
The Ruselectronics holding companyDescription
The technology has been approved in the conditions of industrial production. Pilot installation with use of the serial industrial electron accelerator developed in FSUE MRTI RAS mark "EOL-400М" has been created and tested for this purpose. The obtained results and experience of the equipment technical operation guarantee possibility of universal industrial electron beam installation of modular type creation.
Possible scopes of offered installation:
Disinfecting of waste waters from pathogenic microflora. Full sterilization of waste waters with initial level of infection up to 106 bac/ml is possible.
Waste waters treatment from organic pollution. Presence of chemical and biological impurities considerably decreases.
Processes of galvanic shops etching solutions regeneration and possibility of copper removal from the worked out drains.
Processes of potable water neutralization from heavy metal ions. The solution of a problem of water purification from radio isotope pollution is possible.
Installation technical characteristics:
Electron energy 600 keV
Electron beam current 70 mA
Industrial Efficiency 70 %
Power consumption 60 kW
Weight of installation 2500 kg
Total mass of the equipment 6000 kg
Productivity of processing 10 m3/h
Possible scopes of offered installation:
Disinfecting of waste waters from pathogenic microflora. Full sterilization of waste waters with initial level of infection up to 106 bac/ml is possible.
Waste waters treatment from organic pollution. Presence of chemical and biological impurities considerably decreases.
Processes of galvanic shops etching solutions regeneration and possibility of copper removal from the worked out drains.
Processes of potable water neutralization from heavy metal ions. The solution of a problem of water purification from radio isotope pollution is possible.
Installation technical characteristics:
Electron energy 600 keV
Electron beam current 70 mA
Industrial Efficiency 70 %
Power consumption 60 kW
Weight of installation 2500 kg
Total mass of the equipment 6000 kg
Productivity of processing 10 m3/h