 |
Unit for simulating fire and overheating signals BISP
SCOPE of application the Unit is designed to check the performance of BUOS units, BI 06G, USP and SPP signaling devices.
Part number:
Description
MAIN CHARACTERISTICS OF THE UNIT
* providing simulation and change of TADS signaling devices in the range from 5 to 100 mV sequentially on nine independent-
my outputs;
* providing simulation and indication of current control channels blocks in the range from 2 to 10 mA;
* providing measurement of the current consumption of the tested units in the range from 0.2 to 2 A;
* providing indication of the presence of input signals for 23 inputs;
* providing simulation of the resistance of the "alarm-block" circuit and simulation of the breakage of the alarm circuit;
* ensure that the power supply is connected in series to two 27 V buses and that the connected bus is indicated.
TECHNICAL PARAMETERS
Length not more than 480 mm
Width not more than 200 mm
Height not more than 300 mm
Unit weight no more than 7.5 kg
Operating temperature -40...+50°C
* providing simulation and change of TADS signaling devices in the range from 5 to 100 mV sequentially on nine independent-
my outputs;
* providing simulation and indication of current control channels blocks in the range from 2 to 10 mA;
* providing measurement of the current consumption of the tested units in the range from 0.2 to 2 A;
* providing indication of the presence of input signals for 23 inputs;
* providing simulation of the resistance of the "alarm-block" circuit and simulation of the breakage of the alarm circuit;
* ensure that the power supply is connected in series to two 27 V buses and that the connected bus is indicated.
TECHNICAL PARAMETERS
Length not more than 480 mm
Width not more than 200 mm
Height not more than 300 mm
Unit weight no more than 7.5 kg
Operating temperature -40...+50°C