 |
ULTRAPLATE - Automated UST-Equipment for Plate and Strip
UTE "ULTRAPLATE" is intended for automatic ultrasonic testing (UST) of plate and strip in metallurgical works (online construction of the test unit) as well as on the certain area of testing (offline construction of the test unit).
Part number:
Supplier:
ZAO ULTRAKRAFTDescription
MAIN ADVANTAGES OF EQUIPMENT
Ultrasonic testing by using of the electromagnetic acoustic transducer (EMAT) without contact liquid and the necessity of its regenerating and recycling;
Surface temperature of the testing plate is up to 720 Celsius degree;
Testing of the plate and strip with the high curvature;
High testing reliability of the plate and strip with dirty surface;
Testing speed during transportation of the plate and d strip is up to 2.0 m/s;
High sensitivity of internal flaw (lamination) is equivalet to FBH2;
Detection of surface and subsurface flaws such as cracks, slivers, rolling marks, etc with the depth of 0.2 mm and size of more than 1 mm.
MAIN CHARACTERISTICS OF THE EQUIPMENT
Plate Strip
Edge condition Cut off and unedged -
Width 1000 – 5500 mm >300 mm
Thickness
5 – 75 mm
(>75 optionally) > 1,2 mm
Temperature up to 720 Celsius degree
Transportation speed up to 2,0 m/s up to 20 m/s
Thickness accuracy ± 0,05 mm
Sensitivity to surface flaws depth 0,2 mm no more than 1 mm
Sensitivity to lamination FBH2
Efficiency (it depends on standard size of plate and strip)
up to 4.5 mln tonne per year up to 1 mil tonne per year
Ultrasonic testing by using of the electromagnetic acoustic transducer (EMAT) without contact liquid and the necessity of its regenerating and recycling;
Surface temperature of the testing plate is up to 720 Celsius degree;
Testing of the plate and strip with the high curvature;
High testing reliability of the plate and strip with dirty surface;
Testing speed during transportation of the plate and d strip is up to 2.0 m/s;
High sensitivity of internal flaw (lamination) is equivalet to FBH2;
Detection of surface and subsurface flaws such as cracks, slivers, rolling marks, etc with the depth of 0.2 mm and size of more than 1 mm.
MAIN CHARACTERISTICS OF THE EQUIPMENT
Plate Strip
Edge condition Cut off and unedged -
Width 1000 – 5500 mm >300 mm
Thickness
5 – 75 mm
(>75 optionally) > 1,2 mm
Temperature up to 720 Celsius degree
Transportation speed up to 2,0 m/s up to 20 m/s
Thickness accuracy ± 0,05 mm
Sensitivity to surface flaws depth 0,2 mm no more than 1 mm
Sensitivity to lamination FBH2
Efficiency (it depends on standard size of plate and strip)
up to 4.5 mln tonne per year up to 1 mil tonne per year