Patient Monitors MITAR 01 RD are intended to control the following physiological parameters:

electrocardiogram (ECG, HR) up to 12 leads simultaneously with the measurement of ST deviation in each lead and arrhythmia analysis;
non-invasive blood pressure (NIBP) in manual, automatic and continuous mode with the possibility of including measurement of blood pressure when you change the propagation time of the pulse wave; ;
invasive blood pressure (IBP) up to 4 channels, ability to measure negative and low pressures;
blood oxygen saturation (SpO2) with sensors Nellcor, Nonin or their equivalents;
pneumogram and respiratory rate by geographic and thermostat types of measurement;
temperature of the body (T) up to 2 channels;
capnography (CO2) in main or side flow;
oximetry (O2) with electromechanical or paramagnetic sensor;
cardiac output by thermodilution;
Multi gases (CO2, O2, N2O, HAL, ISO, EN, SEV, DES), by Phasein, Sweden;
depth of anesthesia by BIS, Covidien company, USA.

Features:

The possibility of wired or wireless (WiFi) connection to the central station (optional);
Ability to use personal information model (individual selection of the required number of channels and graphic layout from 2 to 12, and the ability to disable unnecessary user physiological functions);
The possibility of the synthesis of 12-lead ECG with 5 electrode cable;
Small dimensions and weight of the monitor to operate on battery power up to 5 hours of battery life;
Mode of displaying large numbers (up to 35 mm) allows you to monitor physiological parameters of the patient distantly;
Automatic change of the level of screen brightness depending on the ambient light;
The possibility of transfer of monitored patient data from one monitor to another using an SD card or USB memory stick;
Bed-to-bed preview and updates (optional);
Interfaces: COM port to change the software options - 2 COM ports (MULTI B1, MULTI B2), a VGA port, multi connector MULTI A, USB port.

General characterictics:

Device can be supplied in English, Russian or Turkish version. Please, contact us if you need other language interface;
Built-in graphical thermal printer (optional)
Ability to connect to central station
Modes: adult, children and neonatal
Calculators: doses of drugs, hemodynamic, oxygenation, ventilation, and renal function.
Appointments sheet.

Power supply:

Power supply: 85-265 V AC, 50/60 Hz.
Powered by the vehicle electrical system 12 V (10-16 V)
Power consumption: less than 50W
Work on the internal battery up to 5 hours
Battery Indicator

DISPLAY

Type: TFT color touch display
Diagonal size: 10.4 "(26.5 cm) or 12.1" (31 cm).
The number of channels displayed curves: from 2 to 9.
The number of displayed ECG: up to 12
Resolution: 800x600 pixels.
Stopping curves - 2 mode.
"Sleep" mode.

MEMORY

To 100 fragments of any physiological functions.
Graphical and tabular trends of all parameters for the time up to 8 days.
Short trends.
Oxicardiorespirogramma
Full record monitored data on the SD card or FLASH card
Thresholds alarm

ALARM

Three levels visual and audible alarm
Alarm when going beyond the set standards for all monitored parameters.
Ability to block the sound alarm
Relay to call nurses.
Arrhythmia alarms